Honeywell TH6320ZW2003 T6 Pro Series Z-Wave Stat Thermostat &, Smart Home
$138.99
Related Products
USED – Good condition
8 reviews for Honeywell TH6320ZW2003 T6 Pro Series Z-Wave Stat Thermostat &, Smart Home
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Honeywell TH6320ZW2003 T6 Pro Series Z-Wave Stat Thermostat &, Smart Home
$138.99
Amazon Customer –
Easy installation
Works perfectly. Replaced old unit. Easy to install
cbeecham –
Outstanding Z-Wave Thermostat
Absolutely easy to install and looks nice – very modern looking and sleek. I’d advise examining the manual prior to installing and be sure to understand each setting prior to popping it on the wall. Make sure you know what type of HVAC equipment you own and its capabilities such as system type, number of heating and cooling stages, etc. It will make setup much easier and possibly save your equipment from damage due to to improper settings. The nice thing is, you can pop the batteries in and run through the settings before attaching it to the mount. (If your current thermostat has an advanced or installer setup, I’d also recommend running through it and figure out how it is currently configured). Any of these settings can be adjusted after installed, including z-wave inclusion. I have (both) mine attached to my HomeSeer system. It included without a hitch and the configurable devices created exceeded my expectations. Adjustments are a breeze from the app or web interface and reporting is instantaneous. Here is the best part… there is no cloud service involved! I had Honeywell 7 Day WiFi thermostats, and was pleased with them, but had intermittent disruptions of service because their web API is constantly offline. That isn’t a problem anymore. I couldn’t be more pleased with this thermostat. I highly recommend it.
Jason S –
Works well with Z-wave
Works well with my z-wave system/Hubitat.
Jeffrey –
Great ZWave thermostat that truly needs no C wire.
I was looking for a ZWave thermostat that did not require a C wire. This device easily connected to my SmartThings hub with full control in the SmartThings app and voice controls in my Google Home Hub. Batteries, in case of no C wire, work for months due to the simple LCD display.One thing to note, if you are running off of battery power the device will not act as a repeater for your ZWave network. A C wire is needed if you want to use this to expand the size of your network.
Onlysix –
Worth it
Like the other reviewer, I also was coming from a CT100 thermostat. My CT100 started flaking out on me and it wasn’t transmitting Z-Wave data properly anymore.This Honeywell TH6320ZW2003 thermostat is not only nicer and more modern looking, it performs much better than my previous system.I am using this with HomeSeer and had zero issues adding it to the Z-Wave network. HomeSeer found it right away and I was able to control it from that point forward.I highly suggest reading the manual thoroughly before even mounting the thermostat. The Installer Setup Options (ISU) can be a little overwhelming at first glance, but it easily configured with some time and patience.
Dale Coffman –
Not as described
The ones I ordered were to be WiFi compatible. They are not. I had them installed by a heating contractor. Now I find out that need a controller for it to work. Additionally the thermostats were branded with a random company name. I now am not able to return them as they are not what the description was. Do not use this vendor.
Amazon Customer –
No factory reset.
Can’t factory reset, which is a problem if your Z-Wave hub dies and you now can’t exclude your thermostat from the network.
Matt M –
Questionable stock…but good thermostat so far.
Is near as I can tell both of mine were new had batteries in shrink wrap and appeared to be in good condition packaging however one of them is branded by a 3rd party (see photos). Both purchased through the same Amazon order I don’t understand why I received one branded and one unbranded product and The branding is rather ugly.I have not got around to setting up my Z-Wave network with home assistant but it seems relatively straightforward.configuring Auto season changeover took a bit of effort I had to complete the initial setup and then go back into the installer menu but once I realized that they work well here in Virginia where you need heat in the morning and air conditioning in the afternoon. It’s also nice tocuh that it shows the indoor humidity as well as the indoor temperature when it is idle.